Tint ZoneKitchener · Brampton
Black sedan with a deep, uniform window tint

Precision tinting.
Flawless finish. Guaranteed.

Window tint, wraps, paint protection and customs — computer-cut, hand-finished, and installed by people who treat your car like their own.

Two shops, one standard: 30 Howard Pl in Kitchener and 46 Hale Rd in Brampton.

Follow us on Instagram @tint_zone_
2Locations
7 daysA week
Computer-cutFilm, every time

Follow us on Instagram

Recent installs, before & afters, and shop updates from both locations.

@tint_zone_
Open Instagram

What we do

More than tint. If it goes on your car, in your car, or makes your car yours — we probably install it. Call either shop for an exact price on your vehicle.

Technician smoothing tint film onto a car window by hand

Window Tinting

Our core work. Computer-cut patterns for your exact make and model, installed wet, shrunk and finished by hand for clean edges and no peeling. Shades from a light factory look to full privacy.

Cars · Trucks · SUVs · Fleets
Tint film being fitted to a side window inside the shop

Tint Removal

Old, bubbled or purple film — or a shade a previous owner picked — comes off cleanly, glue and all, without damaging defroster lines. A typical two-window removal takes about 30–50 minutes.

From $50 · Two front windows
Compustar remote starter fob standing in snow

Remote Starters

Compustar remote start systems, installed and programmed for your vehicle — automatic or push-start. Warm car in January, cool car in July, and a lifetime warranty on the system we quote.

Compustar · Lifetime warranty
Vinyl wrap being applied to a car's body panel

Vinyl Wraps & Decals

Full colour changes, roof and hood wraps, chrome deletes and custom decals. Change the whole personality of the car — and peel it back to factory paint whenever you're ready.

Full & partial wraps
Clear paint protection film being laid over a car's paintwork

Paint Protection Film

Invisible armour for the panels that take the hits — hood, bumper, fenders, mirrors. PPF takes the stone chips and road rash so your paint doesn't have to.

Clear bra · Full front ends
Gloved hand polishing a glossy car hood during ceramic coating prep

Ceramic Coating

A deep gloss that sheds water and washes clean in half the time. We prep and polish the paint first, then lock it in with a professional-grade coating.

Gloss · Hydrophobic · Easy wash
Dashcam being mounted on a windshield

Dashcams

Hardwired dashcams with the cables hidden properly — clean, tucked wiring, no dangling cords, no rattles, no mess left behind.

Clean, hidden wiring
Car interior glowing with green ambient LED lighting along the dashboard, doors and footwells

Ambient Lights

Interior ambient lighting that transforms the cabin at night — LED strips fitted cleanly along the dash, doors, console and footwells, wired in properly with no visible mess.

Interior LED · Custom glow
Finished black sedan showing dark tinted windows

Detailing

Interior and exterior detailing to finish the job — or undo a winter. Book it on its own or pair it with tint and pick up a car that feels new again.

Interior · Exterior · Full detail

See yourself from outside — the shade simulator

This is a normal 4-door sedan with a driver sitting inside. Everything below is the view from outside only — standing beside the car looking in. Tap a shade or drag the slider and watch the driver appear or disappear. Tint is measured in VLT: the % of light that gets through. Lower number = darker glass = harder to see in.

Outside view only

Look at the driver in the front window. At 70% you see his face clearly. At 15% he is barely there — just a very faint shadow. At 5% he is gone.

▲ Driver — front window35% VLTRear window
FROM OUTSIDE
You can see a silhouette

At 35%, someone standing outside can tell a driver is there and see his shape, but facial details are muted — especially in bright sun.

5% darkest15%20%35%50%70% lightest

Real cars can mix shades — e.g. 70% or 50% up front to stay legal, and 20%, 15% or 5% in back for privacy. This simulator puts the same shade on both side windows so you can compare fairly.

35% — the classic choice

The most popular shade we install. A clear step darker than factory glass, real privacy in daylight, and still easy to see out of at night.

All six shades, side by side — same sedan, same driver

Tap any card to load that shade in the big simulator above. Notice the driver in the front window: clear at 70%, fading through 50% and 35%, hard to spot at 20%, barely visible at 15%, and gone at 5%.

What does VLT actually mean?

VLT = Visible Light Transmission. 70% means 70% of light passes through the glass — so the driver is easy to see. 15% means only 15% gets through — so from outside, the driver is barely visible, just a very faint silhouette. The number is about light, not colour.

Why people go darker in back

Ontario limits front side windows, but rear side and back windows have no set limit. A common setup is legal-and-light up front, then 20%, 15% or 5% in back for kids, dogs, tools and shopping — privacy where it counts, visibility where the law needs it.

Dark outside ≠ dark inside

From inside looking out, even 20% and 15% feel much lighter than they look from outside — like wearing sunglasses. At night, though, darker shades do make shoulder checks harder. If you drive a lot at night, 35% or 50% is often the sweet spot.

How an install goes

Most full tint jobs are done the same day. Here's what happens between drop-off and pick-up.

01

Pick your shade

Tell us the car and the look you're after. We'll walk you through shades — and what's legal on your front windows.

02

Computer cut

Your film is plotted and cut to your exact windows before it ever touches the car. No blades against your glass, no guesswork.

03

Install & finish

Film is shrunk, fitted and finished by hand, edges tucked clean. We check every window in the light before we call it done.

04

Cure & go

Keep the windows up for a few days while the film cures. A little haze early on is normal — it clears as the moisture dries out.

Tint being installed on a vehicle window in the shop

Fleet & commercial work

Vans, work trucks, dealer cars and multi-vehicle jobs — we tint fleets too. Bring us the list of vehicles and we'll price the whole job up front, schedule around your work, and turn them around in sequence so you're never down more vehicles than you can spare.

Talk fleet pricing · (647) 405-0017

Two shops. Pick your closer one.

Both locations do the full menu — tint, wraps, protection and electronics. Call ahead and we'll have a bay ready.

Kitchener

30 Howard Pl, Unit 3
Kitchener, ON

(647) 405-0017

Monday11:00 a.m. – 8:00 p.m.
Tuesday11:00 a.m. – 8:00 p.m.
Wednesday11:00 a.m. – 7:00 p.m.
ThursdayClosed
Friday11:00 a.m. – 8:00 p.m.
Saturday11:00 a.m. – 8:00 p.m.
Sunday11:00 a.m. – 8:00 p.m.

Brampton

46 Hale Rd, Unit 1
Brampton, ON

(647) 963-0017

Monday10:00 a.m. – 8:00 p.m.
Tuesday10:00 a.m. – 8:00 p.m.
Wednesday10:00 a.m. – 8:00 p.m.
Thursday10:00 a.m. – 8:00 p.m.
Friday10:00 a.m. – 8:00 p.m.
Saturday10:00 a.m. – 8:00 p.m.
Sunday10:00 a.m. – 8:00 p.m.

Holiday hours can differ — a quick call before you come by is never a bad idea.

Get a quote

Tell us the vehicle and what you want done. The button below opens your email app with everything filled in — or just call, it's faster.

Kitchener

(647) 405-0017

30 Howard Pl, Unit 3, Kitchener

Brampton

(647) 963-0017

46 Hale Rd, Unit 1, Brampton

Email

tintzonetricity@gmail.com

Send your vehicle, service and preferred time.

Instagram

@tint_zone_

Follow us for recent installs, before & afters, and shop updates.

Copied — paste it into a text or email to either shop.

This opens your own email app addressed to tintzonetricity@gmail.com — nothing is sent until you hit send there.

Questions, answered

How dark can I legally go in Ontario?

The windshield can't be tinted, and front side windows have a light-transmission limit — for vehicles built from January 1, 2017 onward, they must let at least 70% of light through. Rear side and back windows have no set limit. Rules aside, tell us your car's year and we'll set you up with a combination that's both legal and looks right.

How long does a tint job take?

Most cars are done the same day — a full tint typically takes a few hours depending on the vehicle and film. A two-window tint removal usually runs 30–50 minutes. Call ahead and we'll give you a realistic time for your specific car.

What do I do after the install?

Keep the windows up for a few days while the film cures, and don't clean the inside of the glass for the first week. Slight haze or small water pockets in the first days are normal and clear as the film dries.

Can you remove old or bubbled tint?

Yes — removal is a regular job here. We strip the film and the glue without damaging defroster lines, and most people re-tint right after with a fresh shade. Two front windows start at $50.

Do you install remote starters on push-start cars?

Yes. We install Compustar systems on automatic and push-start vehicles alike, and the system we quote carries a lifetime warranty. Price depends on the vehicle — a recent example: $440 all-in for a 2019 Kia Sorento. Call with your year, make and model for your exact number.

Can you tint more than one vehicle / our company vans?

Absolutely — fleet and multi-vehicle work is welcome. Send us the vehicle list and we'll quote the full job up front and schedule the work in sequence around your business.

How do I book?

Call the shop you want — Kitchener at (647) 405-0017 or Brampton at (647) 963-0017 — or use the quote form above and we'll confirm your time by email or phone.

Call Kitchener Call Brampton